Rated voltage:6kV to 35kV(30kV-230kV Power transformer substation)
Rated frequency:50Hz, 60Hz
Rated reactive power capacity:50kvar-36000kvar
Compensation taps:9 to 25 taps
Voltage regulation range:50%Un-100%Un
Regulation reactive power range:25%Qn-100%Qn
Controller system:DWK controller
(1).Improves system power factor
(2). Reduces network losses
(3). Avoid penalty charges from utilities for excessive consumption of reactive power
(4). Reduces cost and generates higher revenue for the customer
(5).Increases system capacity and saves cost on new installations
(6).Improves voltage regulation in the network
(7).Increases power availability
3. The need for capacitors in electric power system
II. Working principle
The work principle of Farady regulating type capacitors is that: Connect all the capacitors to the electric network with voltage regulator ,the output reactive power will be adjust by voltage regulator, refer to the capacitor output power formula.
The set of equipment is made up by following equipments:
1. Load break switch
2. Insolating switch
3. Voltage regulator
4. Intelligent controller
6. Lighting arrester
7. Metering CT, PT
Assuming that the nominal capacitance of the capacitor is Qn , the connected voltage regulator regulation range is 50%Un-100%Un, so refer to the formula ,voltage regulator is designed with 9 taps tap changer to change the network voltage, the output reactive power in every regulator position.
| Taps|| Voltage of capacitors(U)|| Output capaitors(Qc)|
| 1|| 0.6|| 0.36|
| 2|| 0.65|| 0.42|
| 3|| 0.7|| 0.49|
| 4 || 0.75|| 0.56|
| 5|| 0.8|| 0.64|
| 6|| 0.85|| 0.72|
| 7|| 0.9|| 0.81|
| 8|| 0.95|| 0.90|
| 9|| 1|| 1|
The traditional way of reactive power compensation is changing the quantity of capacitors to adjust output reactive power, change method is usually switch or contactor, will result in following hazards:
1. The conventional reactive power compensation method has a large compensation capacity and the adjustment is not flexible, it will lead to the compensation is not suitable , often appear over and not enough.
2. The capacitor switching can cause over-voltage and inrush current, and it will seriously affect and reduce the service life of the switch.
3. When the capacitor is switched on, as the capacitor will charged and discharged, when it need to switch on again, which affects the speed of the switching.
According to the above problems, o company developed the FLYK type reactive power compensation device, has the following advantages:
(1). Energy conservation: Farady voltage regulating type capacitors will change the output reactive power by regulating voltage on capacitors, so that the reactive power can be adjusted smoothly. Comparing with other method, it can ensure the capacitors in best condition, the energy saving effect is much better
(2). Low cost:If the old power transformer substation need to reform, only need to add a voltage regulator between the circuit breaker and capacitors, the original circuit breakers, reactors, capacitors can be reuse, greatly reduce the cost of transformation
(3). Maintance Free:When traditional circuit breaker and contactor switching, switching devices and capacitors often damaged because of the above problems, result in high maintenance costs, using Farady devices, automatic control reactive power output, there is no potential risks of other equipments, greatly reducing maintenance and staff costs in power transformer substation
Packing & Delivery
IV. Equipment application
This type of devices install all electrical components in the cabinet that required, cabinet made of galvanized steel or stainless steel, the voltage is 3 5kV and below, capacitance below 4000kvar will use such structure. This type of structure is orderly, the installation and the maintenance are convenient, the occupied area is small, and the structure is suitable for the interior installation of a new power transformer substation.
2 . Outdoor type
This install type with a fence around the equipment enclosure ,occupy an area of slightly larger, but the maintenance is very convenient, for in indoor and outdoor use, especially suitable for old power transformer reforming.
Founded in 2006, with a registered capital of 10 million USD, Farady transformer enjoys about 10 years experience in distribution transformer manufacture.
Farady transformer is located in Liushi of Yueqing, a costal city, which is often referred as the Electric Products Capital in China. Boardered by the State road, highway, and high-speed railway, close to SHANGHAI/NINGBO/WENZHOU sea ports, and the Yongqiang International airport in Wenzhou, we enjoy a great advantage in transportation which thus can guarantee our clients the fast shipping.
Our main products include: step voltage regulator up to 35kV, conventional and complete self-protection transformer, single phase pad mounted transformer, withstand high overload transformer, capacity-adjustable transformer, amorphous transformer, energy-saving transformer, etc green transformer. All the products of ours have passed the national laboratory type test, which also wins the STATE GRID of China as one of our contractors.
The company is equipped with the state-of-the-art technology, sophisticated facilities, ISO9001 quality management system certification and ISO14001 environment certification approval.
We also enjoy the Certification of New Hi-tech Enterprises, National Spark Program, and own more than 70 item transformer patents, with which our products are not only popular in the domestic market but also exported to Southeast Asia, South America, Africa and the middle east.
Today, boasting the value of products specialization, brand management, and business globalization, with the sprits of pragmatism, innovation, efficiency, and responsibility, Farady Company is dedicated to become the biggest name in the international business of transformers in China, and contributes its share to the transformation from the Made in China into the Invented in China.
1. Quick response in before sales period help you got order
2. Excellent service in production time let you know each step we made
3. Reliable quality solve you aftersale headache
4. Long quality waranty ensure you can buy without hesitate
1. Why I buy Farady transformer
After compare quality,delivery and price you will find out answer
2. How is your farady electrical transformer waranty
12+12month after manufacture date,you total got 2 year waranty
3. Is that possible to be one of distributor of Farady Electric in my country
Yes,once you action is fast enough
4. More question......
Feel free to contact you you will get immediately reply